[ Identification | Description | Input parameters | Output parameters | Links ]

The Guide_m Component

Neutron guide.

Identification

Description

Models a rectangular guide tube centered on the Z axis. The entrance lies
in the X-Y plane.
For details on the geometry calculation see the description in the McStas
reference manual.
The reflectivity profile may either use an analytical mode (see Component
Manual) or a 2-columns reflectivity free text file with format
[q(Angs-1) R(0-1)].

Example: Guide(w1=0.1, h1=0.1, w2=0.1, h2=0.1, l=2.0,
          R0=0.99, Qc=0.021, alpha=6.07, m=2, W=0.003

%VALIDATION
May 2005: extensive internal test, no bugs found
Validated by: K. Lieutenant

%BUGS
This component does not work with gravitation on. Use component Guide_gravity then.

Example values: m=4 Qc=0.0219 W=1/300 alpha=6.49 R0=1

WARNING: This is a contributed Component.

Input parameters

Parameters in boldface are required; the others are optional.
Name Unit Description Default
reflect str Reflectivity file name. Format [q(Angs-1) R(0-1)] 0
w1 m Width at the guide entry  
h1 m Height at the guide entry  
w2 m Width at the guide exit  
h2 m Height at the guide exit  
l m length of guide  
R0_left 0.99
R0_right 0.99
R0_top 0.99
R0_bottom 0.99
Qc_left 0.0219
Qc_right 0.0219
Qc_top 0.0219
Qc_bottom 0.0219
alpha_left 6.07
alpha_right 6.07
alpha_top 6.07
alpha_bottom 6.07
m_left 2
m_right 2
m_top 2
m_bottom 2
W_left 0.003
W_right 0.003
W_top 0.003
W_bottom 0.003

Output parameters

Name Unit Description Default
pTable  
m 1 m-value of material. Zero means completely absorbing.  
alpha AA Slope of reflectivity  
Qc AA-1 Critical scattering vector  
R0 1 Low-angle reflectivity  
W AA-1 Width of supermirror cut-off  

Links


[ Identification | Description | Input parameters | Output parameters | Links ]

Generated automatically by McDoc, Peter Willendrup <peter.willendrup@risoe.dk> / Tue May 26 13:03:59 2020